Acetal MOD 0.8 Gear Rack (118 Tooth, 41 Hole) - goBILDA®

2302 Series Aluminum, MOD 0.8, Hub Mount Gear (32mm Bore, 96 Tooth) - goBILDA®

Acetal MOD 0.8 Gear Rack (118 Tooth, 41 Hole)

You can now build linear slides with our Actobotic beams! These 32 pitch gear racks attach directly to our 12.32” beams, but can easily be cut-down to

Actobotics Beam Gear Rack (32 Pitch, Acetal)

58 Tooth Hub-Mount Gear (MOD 0.8, 4mm Thick Acetal) - goBILDA®

2305 Series Brass, MOD 0.8, Servo Gear (24 Tooth Spline, 30 Tooth) - goBILDA ®

2303 Series Steel, MOD 0.8 Pinion Gear (6mm D-Bore, 30 Tooth) - goBILDA®

80 Tooth Hub-Mount Gear (MOD 0.8, 4mm Thick Acetal) - goBILDA®

Gears - Motion - goBILDA Australia

2304 Series Brass, MOD 0.8, Round Bore, Set-Screw Pinion Gear (6mm Bore, 30 Tooth) - goBILDA®

Acetal MOD 0.8 Gear Rack (118 Tooth, 41 Hole)

70 Tooth Hub-Mount Gear (MOD 0.8, 4mm Thick Acetal)

The 100 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear, but when building on pattern, the most common partner for this gear is a 20 tooth pinion

100 Tooth Hub-Mount Gear (MOD 0.8, 4mm Thick Acetal)

50 Tooth Hub-Mount Gear (MOD 0.8, 4mm Thick Acetal)

This MOD 0.8 pitch, 118 tooth gear rack is the same one used in the goBILDA® Servo-Driven Gear Rack Kits (3207-0001-0001 and 3207-0001-0002). The

Acetal MOD 0.8 Gear Rack (118 Tooth, 41 Hole)