3/4 Carbon Steel NPT Tap and 59/64 HSS Drill Bit POU3/4NPTW/DRILL

3/8 Carbon Steel NPT Tap and 37/64 HSS Drill Bit POU3/8NPTW/DRILL

3/4 Carbon Steel NPT Tap and 59/64 HSS Drill Bit Kit, Qualtech

Irwin DRL&TP BIT NPT 7/16 2PC 80260

Drill America - POU3/4NPTW/DRILL 3/4 Carbon Steel NPT Pipe

Works like an annular cutter, except no magnetic drill needed! Carbide tipped hole cutters are good for cutting stainless steel, cast iron, iron, sheet metal and copper. It also works well with abrasive materials like high density resin and metal plates. Has auto ejecting slug and can cut over 300 holes in stainless steel plate. Comes with Pilot Drill and Hex Key.

1/4 Carbon Steel NPT Tap and 7/16 HSS Drill Bit POU1/4NPTW/DRILL

GlowShift’s 3/8-18 NPT Drill and Tap Kit is ideal for anyone looking to drill and tap a 3/8” hole for their specific use. The featured 3/8-18 NPT Tap is used for tapping the drilled 3/8” hole to 18 NPT for intake temperature gauge sensors, in order to provide optimum results directly from the source. The 37/64” high speed steel drill bit’s overall length is 6 with a 118° point that drills holes with pinpoint precision.

GlowShift 3/8-18 NPT Drill and Tap Kit 6831860

3/4 Carbon Steel NPT Tap and 59/64 HSS Drill Bit Kit, Qualtech

Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammes pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.

Qualtech Dwtpt3/4 3/4 inch-14 NPT Carbon Steel Pipe Tap

Drill America POU 3/4-in Npt (Pipe) Tap and Drill Set in the Tap

3/8 Carbon Steel NPT Tap and 37/64 HSS Drill Bit POU3/8NPTW/DRILL

1-11-1/2 Npt Tapered Pipe Thread Tap High Speed Steel

1/8 Carbon Steel NPT Tap And R HSS Drill Bit Kit, Qualtech, 55% OFF

59 64 DRILL

Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammes pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer.

Qualtech Dwtpt3/4 3/4 inch-14 NPT Carbon Steel Pipe Tap